ProductsBOM ExtractorDelivered
Drawings in.
BOM out.
A bill of materials straight off the drawing. Drop in one sheet or a whole project folder; the bill comes back with every row tied to the page it came from, in your own spreadsheet layout. No row missed, none invented.
| A | B | C | D | E | F | |
|---|---|---|---|---|---|---|
| 1 | ITEM | DESCRIPTION | MATERIAL | SIZE | QTY | PAGE |
| 2 | 1 | PIPE, SMLS, BE | A106 Gr.B | 6" SCH 40 | 12.4 m | p. 14 |
| 3 | 2 | ELBOW 90° LR | A234 WPB | 6" SCH 40 | 6 | p. 14 |
| 4 | 3 | FLANGE WN RF 150# | A105 | 6" | 4 | p. 15 |
| 5 | 4 | GASKET SPW | SS316 / GRAPH. | 6" 150# | 4 | p. 15 |
| 6 | 5 | STUD BOLT + 2 NUTS | A193 B7 / A194 2H | 3/4" × 110 | 32 | p. 15 |
| 7 | 6 | BEAM ISMB 300 | IS 2062 E250 | 6,000 | 3 | p. 22 |
| 8 | 7 | PLATE 12 THK | IS 2062 E250 | 450 × 300 | 8 | p. 22 |
| 9 | 8 | ANGLE ISA 75×75×6 | IS 2062 E250 | 2,400 | 6 | p. 23 |
for a 663-page project set. Typed by hand: 2–3 days.
cells right on the test set. No row missed, none invented.
out to your own spreadsheet layout, columns and headers as you keep them.
26 minutes is a measured run on a real nine-document set (13 minutes on faster hardware). The by-hand figure is an estimate: 2,590 line items at half a minute each. Accuracy: 1,225 of 1,225 cells on a 26-page test set of real fabrication drawings.
Read the drawing once, and the yard works off it.
Straight off the bill. No second spreadsheet.
Cuts packed so the slack is one usable remnant, not a pile of stubs.
An approved plan becomes a buy list. Offcuts are tracked.
Every movement and handover step records who did it.
What teams ask before the pilot.
What does it read?
Fabrication drawings as they are issued: one sheet, or a whole project folder at once. Every row in the bill carries the page it came from, so an engineer can check any line in seconds.
How do we know it is right?
On a 26-page test set of real fabrication drawings it got 1,225 of 1,225 cells right. In the parallel run (week three) it works beside your manual take-off, on your own drawings, before anyone relies on it.
Will it fit our spreadsheet?
Yes. You give us your layout once; every export fills it in, columns and headers as you keep them. Results can also go on to AS400.
What happens to our drawings?
Records sit in your own database, files are deleted when the run ends, and an administrator approves every account. Every edit and approval records who made it.
How long until we use it?
Four weeks: setup, a pilot on one real project, a parallel run beside your manual review, then live with ongoing tuning and support.
Drawing Checker
Before the bill is taken off, the drawing is checked against itself. About one real issue per sheet.